Council Implementing Regulation (EU) 2026/1779
This regulation expands the sanctions list under Regulation (EU) No 269/2014 by imposing asset freezes and prohibitions on providing funds to one natural person and five legal entities (the “ABS Electro” group). The measures target actors involved in the manufacturing of military technology, specifically electronic components used in Russian unmanned aerial vehicles and guided bomb kits, as well as the energy sector.
Commission Implementing Regulation (EU) 2026/1778
This act establishes the technical architecture for the Digital Product Passport (DPP) registry. It mandates that economic operators register granular product data via a secure interface, using eIDAS-compliant identity verification. The regulation defines the operation of a semantic repository for data modeling, requires a permanent audit log for all data modifications, and sets a 10-year data retention period for product traceability and market surveillance purposes.
Commission Implementing Regulation (EU) 2026/1734
This regulation updates technical standards for the killing of livestock by amending Annex I to Regulation (EC) No 1099/2009. It specifies operational parameters for non-penetrative captive bolt devices based on animal weight and introduces nitrogen-based high-expansion foam as an authorized method for pigs and poultry in non-slaughter contexts. The act mandates strict oxygen concentration levels (below 2%) and precise exposure durations for these methods.
Commission Implementing Regulation (EU) 2026/1737
This act grants a ten-year Union-wide authorisation for the biocidal product family “BPF THO TM Desana” (active substance: active chlorine). It permits the use of this product for professional and industrial disinfection of food and feed areas via “Cleaning in Place” methods. The regulation includes a Summary of Product Characteristics (SPC) detailing chemical composition, residue management requirements, and strict protective equipment protocols due to the product’s corrosive properties.
Commission Implementing Regulation (EU) 2026/1410
This regulation grants a Union-wide authorisation for the “Prisman Händedesinfektion” biocidal product family, effective until 30 September 2035. Based on propan-2-ol, the product is authorized for human hygiene purposes (Product-Type 1). The act harmonizes application protocols, contact times, and user categories (general public, professional, and industrial) across the EU, while mandating specific labeling and safety precautions for flammable substances.
Notice regarding the Ancillary Agreement on Air Transport
This notice confirms the entry into force of the Ancillary Agreement integrating Iceland and Norway into the existing Air Transport Agreement between the European Union and the United States. Effective 2 August 2026, the notice establishes that the operational, safety, and market access rules governing transatlantic aviation under the primary EU-US agreement are officially applicable to Iceland and Norway.
Review of each of legal acts published today:
Council Implementing Regulation (EU) 2026/1779 of 17 July 2026 implementing Regulation (EU) No 269/2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine
Council Implementing Regulation (EU) 2026/1779 is a legal instrument adopted by the Council of the European Union to expand the list of individuals and entities subject to restrictive measures under the existing sanctions regime established by Regulation (EU) No 269/2014. ****: This act is directly related to the ongoing conflict in Ukraine, as it targets persons and entities deemed to be undermining or threatening the territorial integrity, sovereignty, and independence of Ukraine. The regulation specifically identifies actors involved in the production of military technology and the energy sector, which are considered vital to the Russian Federation’s capacity to continue its war of aggression.
### Structure and Main Provisions
The regulation follows a standard structure for EU sanctions implementation:
1. **Legal Basis and Recitals:** It cites the Treaty on the Functioning of the European Union and the parent Regulation (EU) No 269/2014, providing the justification for the measures based on the European Council’s conclusions regarding Russia’s military escalation and targeting of civilian infrastructure.
2. **Operative Articles:** Article 1 mandates the amendment of Annex I to Regulation (EU) No 269/2014, while Article 2 establishes the immediate entry into force upon publication.
3. **Annex:** This is the core of the act, providing a detailed list of one natural person (Irina Vladimirovna Kharisova) and five legal entities (JSC “ABS ZEIM Automation”, LLC “Asset Automation”, JSC “VNIIR”, LLC “Asset Electro”, and JSC “Sokol Asset”).
Compared to previous versions, this act represents a targeted expansion of the sanctions list, focusing on the “ABS Electro” group of companies and its leadership, specifically due to their role in manufacturing electronic components—such as the “Kometa” antenna—used in Russian unmanned aerial vehicles (UAVs) and guided bomb kits deployed in Ukraine.
### Key Provisions for Practical Application
For legal practitioners, compliance officers, and relevant authorities, the following aspects are critical:
* **Immediate Effect:** The regulation is binding in its entirety and directly applicable in all EU Member States from the date of its publication (17 July 2026).
* **Asset Freeze and Prohibition:** By being added to Annex I of Regulation (EU) No 269/2014, all funds and economic resources belonging to, owned, held, or controlled by these listed persons and entities are frozen. Furthermore, no funds or economic resources may be made available, directly or indirectly, to or for the benefit of these parties.
* **Evidence-Based Listing:** The “Reasons” column in the Annex provides the legal justification for each listing. This is essential for due diligence, as it explicitly links the entities to the production of military-grade interference technology and the energy sector, which provides revenue to the Russian government.
* **Scope of Association:** The regulation highlights the interconnected nature of the listed entities (e.g., shared management, ownership structures, and common addresses), which serves as a warning for entities conducting business in the Russian electronics and energy sectors to perform rigorous “know your customer” (KYC) checks to avoid indirect involvement with these sanctioned parties.
Commission Implementing Regulation (EU) 2026/1778 of 16 July 2026 laying down the implementation arrangements for the digital product passport registry set up under Regulation (EU) 2024/1781 of the European Parliament and of the Council
Commission Implementing Regulation (EU) 2026/1778 establishes the technical and operational framework for the Digital Product Passport (DPP) registry, a central component of the EU’s sustainable product policy. It defines how economic operators must register product data, how national authorities access this information for market surveillance, and the security standards required to maintain the system. This regulation is a critical piece of infrastructure for the EU’s circular economy, ensuring that product data is standardized, secure, and accessible across the internal market. ****: As this regulation governs the digital passport requirements for products—including construction materials, batteries, and toys—it has direct implications for Ukrainian manufacturers and exporters who must comply with these EU standards to place their goods on the European market.
### Structure and Main Provisions
The Regulation is structured to provide a comprehensive operational manual for the DPP registry. It moves beyond the high-level framework of Regulation (EU) 2024/1781 by detailing the specific technical architecture of the registry, which includes a secure user interface, an API for automated data submission, a semantic repository for data modeling, and a robust log system for auditing.
Compared to previous legislative frameworks, this act introduces a mandatory, high-assurance identity verification process for all economic operators and value chain actors (such as recyclers or repairers). It shifts the responsibility for data accuracy squarely onto the economic operator, while the Commission acts as the system manager and data controller.
### Key Provisions for Practical Use
For those interacting with the registry, the following provisions are the most critical:
* **Identity Verification (Articles 4 & 5):** Access to the registry is restricted to “verified” actors. Economic operators and value chain actors must prove their identity using qualified electronic signatures or seals (eIDAS compliant). This status is valid for a maximum of three years, after which the verification process must be repeated.
* **Registration Granularity (Article 8):** Data must be registered at the most granular level required by specific product legislation (model, batch, or item level). The system performs automated checks on data structure and semantic conformity before issuing a unique registration identifier.
* **Semantic Repository (Article 12):** This is the “authoritative source” for data models. It ensures that all product passports use the same language and structure, which is essential for interoperability across different product groups.
* **Proof of Registration (Article 9):** Once a passport is registered, operators can generate a secure, time-stamped electronic document as proof of compliance. This document is vital for customs clearance and demonstrating market compliance to authorities.
* **Log System and Auditing (Article 14):** The registry maintains a permanent audit trail. Logs of data modifications are kept for the lifetime of the registration, while administrative logs are kept for five years. This ensures accountability and allows authorities to trace any changes made to product data.
* **Data Retention and Deletion (Article 10):** In the absence of specific product legislation, data is automatically deleted 10 years after registration, aligning with the EU’s “Blue Guide” principles on product safety and traceability.
This regulation ensures that the DPP is not merely a digital label, but a legally binding, verifiable, and interoperable data set that will become a prerequisite for market access in the European Union.
Commission Implementing Regulation (EU) 2026/1734 of 16 July 2026 amending Annex I to Council Regulation (EC) No 1099/2009 on the protection of animals at the time of killing as regards the authorisation of non-penetrative captive bolt stunning and nitrogen high expansion foam stunning
Commission Implementing Regulation (EU) 2026/1734 updates the technical standards for animal welfare during killing by amending Annex I to Council Regulation (EC) No 1099/2009. This act incorporates the latest scientific opinions from the European Food Safety Authority (EFSA) to refine the use of non-penetrative captive bolt devices and introduces nitrogen-based high-expansion foam as a new authorized method for specific animal categories. These updates ensure that killing methods remain aligned with current technical progress while maintaining high standards of animal welfare. ****: As this regulation affects standard practices for the slaughter and depopulation of livestock, it has direct implications for agricultural operations and food safety compliance across the EU, including for Ukrainian producers exporting to or operating within the European market.
### Structure and Main Provisions
The act is structured as a technical amendment to the existing legal framework on the protection of animals at the time of killing. It consists of two articles and an Annex that modifies the original Regulation (EC) No 1099/2009:
* **Non-penetrative captive bolt updates:** The regulation clarifies the specific weight thresholds and usage conditions for this method. It distinguishes between its use as a “killing method” (for piglets up to 5 kg and lambs/goat kids up to 4.5 kg) and as a “simple stunning method” (for heavier piglets up to 10 kg and other small ruminants).
* **Introduction of Nitrogen High Expansion Foam:** This is a new addition to the list of authorized methods. It is strictly limited to pigs (15–41 kg) and poultry (laying hens and broilers) for purposes other than slaughter (e.g., disease control or depopulation).
* **Changes from previous versions:** Unlike the previous version of the Annex, which provided more general guidance, this regulation introduces highly specific operational parameters, such as mandatory oxygen concentration levels, exposure times, and foam expansion ratios, which were previously absent or less defined.
### Key Provisions for Implementation
For operators and regulatory authorities, the following provisions are critical for compliance:
1. **Strict Technical Parameters for Foam:** When using nitrogen high-expansion foam, operators must ensure the residual oxygen concentration remains below 2% by volume. The regulation mandates a minimum exposure time of 5 minutes for poultry and 7 minutes for pigs, with a required foam expansion ratio of 1:>250.
2. **Operational Requirements for Captive Bolts:** The regulation now mandates specific anatomical positioning for the device. For piglets, the impact must be on the midline of the frontal-parietal bone; for neonatal lambs and goat kids, it must be applied on the midline behind the poll (between the ears) with the chin tucked.
3. **Monitoring and Safety:** The regulation emphasizes the need for continuous monitoring of oxygen levels during foam use and requires that the foam be transparent to allow for the observation of the animals, ensuring that the process is effective and that no animal is left conscious.
4. **Scope Limitation:** It is vital to note that the authorization for nitrogen foam is restricted to the specific weight ranges and species mentioned. Using this method on animals outside these categories or for purposes other than those specified (e.g., standard commercial slaughter) is not covered by this authorization and would require separate scientific validation.
Commission Implementing Regulation (EU) 2026/1737 of 16 July 2026 granting a Union authorisation for the biocidal product family BPF THO TM Desana in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
Commission Implementing Regulation (EU) 2026/1737 grants a Union-wide authorisation for the biocidal product family known as “BPF THO TM Desana.” This regulation permits the marketing and professional/industrial use of this product family for the disinfection of food and feed areas, specifically targeting bacteria, yeasts, and fungi. The authorisation is valid for a ten-year period, from 6 August 2026 until 31 July 2036.
### Structure and Main Provisions
The act is structured into two main articles and a comprehensive Annex.
* **Articles:** Article 1 formally grants the authorisation to Thonhauser GmbH, specifying the authorisation number (EU-0036217-0000) and the validity period. Article 2 establishes the entry into force of the regulation.
* **Annex:** The Annex serves as the “Summary of Product Characteristics” (SPC). It is divided into three levels:
1. **Administrative Information:** Details on the authorisation holder, manufacturers, and active substance (active chlorine released from sodium hypochlorite).
2. **Meta SPCs:** The family is divided into three distinct “Meta SPCs” (1, 2, and 3), which group products based on specific chemical compositions and concentration ranges of pH regulators (potassium hydroxide and sodium hydroxide).
3. **Individual Products:** A list of specific trade names associated with each Meta SPC.
Compared to previous individual national authorisations, this Union authorisation allows the product to be placed on the market across all EU Member States under a single regulatory approval, streamlining compliance for the manufacturer.
### Key Provisions for Use
For those utilizing or handling “BPF THO TM Desana,” the following provisions are critical:
* **Scope of Use:** The product is strictly limited to “Product-type 4” (Food and feed area). It is intended for professional and industrial use, specifically for the disinfection of non-porous hard surfaces and beverage dispensing installations via “Cleaning in Place” (CIP) methods.
* **Safety and Risk Mitigation:** The product is classified as corrosive (H314, H290, EUH071) and very toxic to aquatic life (H410). Users must adhere to strict Personal Protective Equipment (PPE) requirements, including chemical-resistant gloves (EN ISO 374), goggles (EN 166), and protective coveralls (EN 14605).
* **Operational Constraints:**
* **Application:** The product must be used in a maximum concentration of 3.78% (w/w) in water.
* **Residue Management:** Users must ensure that chlorate concentrations in food commodities do not exceed the Maximum Residue Levels (MRLs) established by Regulation (EU) 2020/749.
* **Storage:** The product has a shelf-life of 8 months and must be stored in a dry, cool, well-ventilated area at temperatures not exceeding 20°C, protected from frost and heat sources.
* **Environmental Protection:** The regulation mandates specific spill containment procedures, prohibiting the discharge of unused product into drains, water courses, or the ground.
**:** As this regulation concerns the safety of food and feed areas and the management of chemical substances within the European Union, it is highly relevant to food safety standards and industrial hygiene practices in Ukraine, particularly for companies exporting to the EU or operating under EU-aligned safety protocols.
Commission Implementing Regulation (EU) 2026/1410 of 26 June 2026 granting a Union authorisation for the biocidal product family Prisman Händedesinfektion in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
Commission Implementing Regulation (EU) 2026/1410 grants a Union-wide authorisation for the biocidal product family ‘Prisman Händedesinfektion’. This regulation allows the product to be made available on the market and used across all European Union Member States for human hygiene purposes (Product-Type 1). The authorisation is based on the assessment that the product meets the safety and efficacy conditions required by Regulation (EU) No 528/2012.
### Structure and Main Provisions
The act is structured into two primary articles and a comprehensive Annex detailing the Summary of Product Characteristics (SPC).
* **Article 1:** Formally grants the Union authorisation to Schuelke & Mayr GmbH, assigning the authorisation number EU-0034420-0000. It specifies the validity period from 6 August 2026 until 30 September 2035.
* **Article 2:** Sets the entry into force for the twentieth day following its publication.
* **The Annex:** This is the core technical component, divided into multiple “Meta SPCs” (1 through 12). Each Meta SPC defines specific compositions, target organisms (bacteria, yeasts, mycobacteria, viruses, etc.), application rates, and user categories (general public, professional, and industrial).
Compared to individual national authorisations, this Union authorisation provides a harmonized regulatory status, ensuring consistent safety and efficacy standards across the EU.
### Key Provisions for Use
For those utilizing or distributing this product, the following provisions are critical:
* **Active Substance:** The product family relies on propan-2-ol as the active substance, with concentrations varying by specific product formulation (ranging from 63.1% to 75% w/w).
* **User Restrictions:** The regulation strictly defines the category of users for each specific use case. Some uses are restricted to “professional” or “industrial” users, while others are permitted for the “general public.”
* **Application Protocols:** The Annex provides precise instructions for hygienic and surgical hand rubs, including required contact times (e.g., 30 seconds for hygienic, 45–180 seconds for surgical) and application volumes (3ml to 10ml depending on the specific use).
* **Safety and Risk Mitigation:** The regulation mandates specific hazard statements (e.g., H225: Highly flammable liquid and vapour) and precautionary measures (e.g., P210: Keep away from heat/sparks; P305+P351+P338: First aid for eye contact).
* **Refilling Requirements:** For professional and industrial users, the regulation sets strict labeling requirements for any containers or dispensers used for refilling, ensuring that the authorization number, trade name, and active ingredient information remain visible.
**:** This regulation has direct implications for the supply chain and health safety standards in all Member States, including those with significant humanitarian or medical needs, as it standardizes the use of this disinfectant for both domestic and clinical settings.
Information concerning the entry into force of the Ancillary Agreement between the European Union and its Member States, of the first part, Iceland, of the second part, and the Kingdom of Norway, of the third part, on the application of the Air Transport Agreement between the United States of America, of the first part, the European Union and its Member States, of the second part, Iceland, of the third part, and the Kingdom of Norway, of the fourth part [2026/1745]
This notice serves as the formal legal confirmation of the entry into force of the Ancillary Agreement concerning air transport relations between the European Union, Iceland, Norway, and the United States. It establishes that the procedural requirements for the agreement’s activation have been satisfied following the final notification deposited on 2 July 2026. Consequently, the agreement becomes legally binding and operational across the signatory parties effective 2 August 2026.
**Structure and Provisions**
The act is a formal notification published in the Official Journal of the European Union, functioning as a legal instrument to trigger the commencement of the Ancillary Agreement. The structure of the underlying agreement, signed in 2011, is designed to integrate Iceland and Norway into the broader Air Transport Agreement previously established between the EU and the United States. Compared to the initial framework of the EU-US Air Transport Agreement, this Ancillary Agreement acts as a supplementary legal bridge, ensuring that the rights and obligations contained within the primary agreement are extended to, and accepted by, Iceland and Norway. It formalizes the regulatory alignment necessary for these EFTA states to participate in the transatlantic aviation market under the same legal standards as EU Member States.
**Key Provisions for Implementation**
The most critical aspect of this notice is the activation of the legal mechanism stipulated in Article 9 of the Ancillary Agreement. By confirming the date of the final notification, this act provides the definitive legal certainty required for aviation authorities and commercial operators to rely on the provisions of the agreement. For stakeholders, this means that as of 2 August 2026, the specific operational, safety, and market access rules governed by the EU-US Air Transport Agreement are officially applicable to the air transport relationships involving Iceland and Norway in their capacity as parties to this ancillary framework. This ensures a harmonized legal environment for transatlantic flights involving these nations, effectively removing previous jurisdictional ambiguities regarding their status under the primary EU-US agreement.
